Prepare for The Cool Weather – Waukesha Appliance Repair and Maintenance

Waukesha Appliance RepairImagine you’ve come home from a day’s work. After unwinding a bit, you open the door to your refrigerator to begin dinner preparations, only to find your meat and dairy items aren’t nearly as cold as they should be. Dinner plans go out the window as you scramble to find a solution to your refrigerator woes.

There is no worse timing for an appliance to give out than right at the moment you need them! Before you request assistance, here are a few troubleshooting suggestions that may keep you from needing Waukesha appliance repair in our coldest winter months.

Refrigerator Isn’t Cooling Properly

  • Clean the Seal: The seal on refrigerator doors can often have food particles or other grime that allow cool air to slowly filter out of the appliance. Use a solution of baking soda and water applied with a toothbrush, then wipe the rubber seal down with a wet cloth.
  • Dust the Coils: Dirty coils make the refrigerator work harder to cool down, often resulting in higher temperatures. Located your refrigerator’s coils (either at the front base or the back of fridge) and use the brush attachment on your vacuum to clear any dust or debris.
  • Check the Fan Motor: The refrigerator relies on the evaporator fan motor to cool it’s compartments. Locate the fan motor (often inside the freezer) and see if you can move the fan blades. If you cannot, you likely need a new motor.

Signs your Refrigerator Might Need Repairs

Dryer Takes Too Long to Dry

  • Check the Vent: If the vent is clogged, the dryer won’t be able to heat properly. Regular cleaning should be performed by a professional since the process usually entails taking the appliance apart.
  • Power Connection: While simple, this step is easily overlooked. Check to make sure the power source hasn’t been bumped or disconnected. You may even try unplugging and reconnecting an electric dryer.

Dishwasher Isn’t Cleaning the Dishes

  • There’s No Water: Make sure the water shut-off valve is open. If the valve is open, but the dishwasher still isn’t getting water during the fill cycle, the valve may need to be replaced.
  • More Soap: If you’re dishes aren’t coming out as clean as they should be, try using more soap. If there are two soap compartments and you’ve only been filling one, try filling both.
  • Clean Your Dishwasher: It’s a good idea to periodically clean your dishwasher to remove any calcium build-up that has occurred. Calcium build-up often leaves a smokey film on dishes, most noticeable on glassware. There are a variety of dishwasher cleaners available for purchase.

If after following the above troubleshooting tips you still find your appliance isn’t functioning as it should, feel free to give us a call at Lake Country Home Services. We know the added stress that can come with an appliance breaking down without warning, as well as how difficult it can be to merely stay on top of the upkeep. Whether you’re in need of a Waukesha appliance repair or routine maintenance, our service men are highly qualified to help with whatever you need. We are here to help you keep your appliances in tip-top shape this winter!

Ensure Your Range is in Tip Top Shape for Winter!

Range Maintenance Tips

With the chill of winter looming around the corner, evening barbecues will quickly be replaced with dinners around warm pots of soup and steaming bowls of pasta doused with marinara. As you prepare for the shift in cooking venues, here are some useful tips to help guarantee your range is prepared to take on all of your savory recipes.

Range Maintenance Tips

While pots and pans get a cleaning after each use, burners and drip pans tend to be cleaned less often. A clean range is not only pleasing, but can ensure your elements are heating evenly, as well as help you avoid needing a range repair down the road. Use these cleaning tips as part of your routine range maintenance.

For electric burners, it’s important to keep drip pans clean for proper heating. When the burners have completely cooled, lift them out of the range and remove the drip pans to clean. An easy way to clean these is to place each burner pan in a plastic zip-close bag with a small amount of ammonia. Zip closed and after a few hours, rinse and return to the range.

Range hoods often are forgotten in the cleaning process, but maintaining a clean hood filter will keep your kitchen well ventilated during cooking times. You can clean these easily in your sink or bathtub. Fill the basin with warm water and add a cup of vinegar. Soak the grate for about 10 minutes and then rinse the grate with either your shower or sink sprayer.

Range Repairs

If one of your electric burners is not heating properly, it may need to be replaced. To test whether the source of the problem is the burner or the socket, simply remove the burner and replace with an alternate burner from your range. If the burner works, then a new burner is all you need. However, if the alternate burner doesn’t heat up, you may need to request a range repair from a service professional.

Gas burners can have trouble lighting due to grime build-up. If your burner won’t light, make sure the burner is clean. If it is free of debris and build-up, but still not lighting, there may be a more complex problem that a repairman can solve. Feel free to request an appointment with one of Lake Country Home Service’s representatives so one of our trained serviceman can help restore your range.

As the cold air and snow ushers us into our homes for our meals, we all want to prepare our favorite dishes without a hitch. By keeping current on your range maintenance, you can lengthen its life and be assured it’s in full working order for all of your upcoming winter meals. We hope these tips will help you in caring for your range and, as always, feel free to contact us if you have any questions.

Oven Maintenance in Preparation for Baking Season

As the warm air begins to wane and cooler air and fall breezes begin to roll in, the scent of apple pies and pumpkin bread are on the horizon. In an effort to prepare for baking season, it’s important to make sure your oven is well maintained and ready for the workload.

Prevent Build Up

In order to prevent build-up and maintain efficient baking, ovens should be cleaned at least 1-2 times per year. You can use your oven’s self-cleaning setting, if it has one, but make sure to follow the manufacturer’s guidelines for safe use of this feature. Be at home during the cleaning process and open a window to help with ventilation, as your kitchen will get quite warm in the process. To cut down on burnt drippings along the bottom of the oven, you can place a foil-lined cookie sheet at the base or bottom rack of the oven – just be sure not to cover any vents. The foil can be replaced periodically and will help tremendously with cutting down on oven grime!

Common Problems

A loose knob, broken oven Oven Maintenance for Baking Seasoncoil, or moisture forming on the outside of your oven door are all issues that shouldn’t be ignored. If you notice any loud or mechanical sounds coming from your oven, whether gas or electric, discontinue use immediately. Our maintenance professionals at Lake Country Home Services will be more than happy to come out to diagnose the problem as well as provide any repairs that are needed. Some of the common issues and oven repairs we address include defective thermostats, electrical issues, broken oven igniters and blown thermal fuses.

We all want our ovens to be functioning properly and able to keep up with our daily cooking and baking needs, especially leading into the holiday season. To be sure your oven’s prepared, it’s essential that maintenance and repair be done properly and efficiently. Follow these basic tips and call on your local professionals at Lake Country Home Services for any oven maintenance you may need; you’ll ensure you won’t miss a beat this baking season. Happy baking!

How to Maintain Your Freezer to Avoid Repair Costs

It’s easier to maintain your freezer than have to bring a repairman in to fix it. Perform these simple freezer maintenance activities laid out here to avoid freezer repair costs and maximize the efficiency of your freezer.

Clean the Condenser Coils

As dirt builds up on the coils, the condenser must work harder and harder to sustain the correct temperature, which means greater power bills and a reduced lifespan for your overtaxed freezer. To prevent these complications, clean the coils thoroughly every three months (every month when you have pets). Simply unplug your freezer, locate the coils on the back or bottom of the unit and vacuum them down.

Maintain your Freezer - Freezer RepairDefrost It Regularly

Most contemporary freezers have a self-defrosting setting, enabling the unit to routinely thaw any frost. When you have a manual defrost freezer, you need to shut off the freezer occasionally to let it defrost normally. Sometimes very dense frost must be scraped off by hand instead of melted naturally.

Balance Its Position

Your freezer needs a balanced placement to prevent warping of the doors. If the freezer is unlevel it may make the doors shut at unusual angles, resulting in a weak seal and ultimately twisting the door’s standard shape. A hand level and wrench can be used to adjust the appliance’s legs. You will extend your freezer’s lifespan with a properly balanced position. Also, keep your freezer a reasonable distance away from the wall to prevent overheating.

Clean the Drain Opening and Pan

Even a self-defrosting freezer needs to have its drain opening cleaned periodically to properly eliminate the moisture collecting from its everyday defrost cycles. To do this, first unplug your freezer. Next, find your freezer’s drain opening, and remove any mineral deposits or crud which might be clogging it. Beneath most freezers is a pan that accumulates condensation running off the cooling coils. Although most of this water ought to naturally evaporate, it is wise to clear the pan occasionally. Take off the freezer’s front grille and slide out the pan, dispose of the water and carefully wipe the pan off. This type of regular cleaning will keep mold spores from growing on the pan and contaminating the air around your freezer.

Examine the Seal

A strong door seal allows your freezer to keep a steady temperature without too much effort. Examine the rubber gasket on the door for any splits or deterioration that may keep it from sealing properly. If you can shut a piece of paper in the door and easily pull it out, the gasket probably needs replacement. If the gasket remains strong, simply wipe it off occasionally to get rid of any dust or gunk.
Even when following these easy tips for freezer maintenance, issues may arise that require the assistance of a professional repair service. Lake Country Home Services provides fast and affordable advice and repairs for freezer owners in the Milwaukee area on those occasions when repairs are essential.

When to Call an Ice Maker Repair Technician

Many calls to Milwaukee appliance repair companies concern ice makers. Ice maker repair can be complicated. There are certain common problems that you may be able to resolve yourself. Some problems, however, often cannot be repaired without special parts and knowledgeable technicians.

What to Check for FirstIce Maker Repair

There are things you should check for that will tell you whether or not calling a Milwaukee appliance repair shop. One of the first things to check is if the water is turned on. Often someone will accidently turn off the water inside the freezer compartment or at the water line which connects to the appliance.

The mechanisms responsible for first creating then expelling the ice cubes into a container or tray often get stuck. Ice cubes may get caught in the mechanism and stop the unit from producing more ice or filling with water. Check for this by looking into the chute or lifting up the mechanism where the ice drops.

Sometimes the line will freeze between the water input point and where the water empties into the unit. Several things can cause this, such as the freezer temperature is too high, or the insulation for the line is insufficient to stop the water from freezing. If your unit allows you to lower the freezer temperature then see if that eliminates the problem. If you cannot do so, then you may need to call a home appliance repair company that can do ice maker repairs.

What Symptoms Are Not the Fault of the Ice Maker

Some problems may appear to be an issue with your ice maker but are caused by something else. For example, many times people complain of odors or bad taste. This likely is not the ice maker but rather the water filter.

White specs in ice cubes do not come from the ice maker. Calcium carbonate build up in the water causes specs to form. As the water freezes, the formerly unnoticed particles become visible. Using a water filter can solve this problem.

Symptoms that Require a Service Tech

If the ice dispenser component will not eject the cubes, very likely a part needs replacement. Sometimes an ice maker will continually make ice cubes without stopping. The likely requires a new sensor or some other part internal to the ice maker. Most ice maker repair shops will have parts on hand for most major brands. If not the parts for these sorts of problems can usually be ordered locally.

Sometimes an ice maker will stop working entirely, with no visible signs of a cause. Given the complexity of ice makers today, and the way that they integrate with each refrigerator make and model in different ways sometimes, you likely will need to call a repair shop such as Lake Country Home Services.

3 Signs You Need Milwaukee Appliance Repairs

Have you ever walked into your Kitchen and felt like you were in a war zone? Any unusual sounds that are coming out of your appliances may mean that you need appliance repairs. Let’s talk about 3 appliances that typically make the noises and the signs you can see or hear which means you need Milwaukee appliance repairs.

Dishwasher Repair Signs

A dishwasher will produce loud noises if a hard piece of food remains at the bottom on the tank. Usually, the object lodges between the dishwasher’s pump or gears. When a pool of water remains in a dishwasher, repairs will be needed immediately. Without maintenance, key components in the appliance will rust.Although a dishwasher will function with a broken latch, maintenance is still required. Over time, the unit will not clean the dishes properly because the door won’t completely seal.The experts at Lake Country Home Services understand how to repair and maintain the most common dishwasher brands. Many Milwaukee appliance repairs can be completed within one day.

Garbage Disposal Repair Signs

garbage disposal repair - Milwaukee appliance repairsIf your garbage disposal backs up frequently, it may be clogged. A clog often happens when hard foods are jammed in the disposal.
Whenever you smell a foul odor, the unit may have a clog that consists of rotten food. You can alleviate this problem by running the disposal for a bit. However, a professional must be hired if water constantly flows into the sink while the motor is running. A loud or unusual noise will require immediate maintenance. Grinding sounds will occur after a piece of silverware drops down the drain.The staff at Lake Country Home Services implements the best testing procedures whenever a garbage disposal malfunctions. In addition, every replacement component is backed by a warranty.

Microwave Repair Signs

If the touch pad does not function properly, the entire pad must be cleaned or replaced. The microwave oven door, however, is a more important component because it blocks radiation. If the interlock switches do not send out a signal to the door, the unit will not produce heat. When a microwave continues to run while the door is open, the door release button and hook must be inspected.A microwave usually produces louder sounds as it ages. However, a unit that buzzes and knocks has a serious problem and will need maintenance.Microwave repair projects require knowledge and training. Lake Country Home Services technicians always use the correct techniques and equipment to pinpoint and solve typical microwave problems.

If your appliances display certain signs, they will require an inspection. If you are local in need of Milwaukee appliance repairs, then contact Lake Country Home Services because the staff has more than 30 years of experience.

Garbage Disposal Maintenance Tips

Garbage Disposal MaintenanceAt Lake Country Home Services, we see a lot of beat up garbage disposals in need of repair. While we are happy to fix the ones that can be repaired, many of the problems encountered could be avoided with simple and routine maintenance. Like any piece of machinery, basic upkeep will help keep a garbage disposal running at its best for as long as possible. As one of the leading Milwaukee appliance repair service providers, we feel a duty to help people prevent damage from occurring in the first place.

Proper Use Is Key

The first step in garbage disposal maintenance is proper use. Always run cold water while using the disposal. This keeps the ground materials flowing out of it. The cold helps solidify oils and fats that would otherwise cling to the blades. Keep running the water for at least twenty seconds after everything is ground up and turn the disposal off before the water. Avoid putting large chunks of food down it. They should be broken into smaller bits and then fed into it a few pieces at a time. The disposal should be run often. This prevents anything from building up around the blades and helps keep them rust free.

Cleaning Your Garbage Disposal

Garbage disposal maintenance is very easy. The basic cleaning method is to run it when it is empty and pour soap and cold water down it. Occasionally grinding hard materials, such as nut shells, fruit pits, and small bones, creates grit that will clean build-up off the walls of the disposal. Bad odors are a common problem in garbage disposals. Making vinegar ice cubes and feeding them into the disposal can help get rid of smells and it provides the same benefits as putting other hard objects down there. Pour baking soda into the disposal and let it sit for an hour or two before flushing it out. It should absorb most of the odors. Grinding the peels from citrus fruits can work as a natural air freshener.

Maintaining your Garbage Disposal

To keep the disposal running at its best, avoid putting certain things down it. Try to put as little grease as possible down it. Fibrous foods can get tangled around the blades. Starchy foods can break down and form a paste that can jam the grinder. Chemical cleaners should be avoided.

If a garbage disposal stops working, or is not performing at its best, there are a few things that can be done. Check to see if there is an object or any type of build up that is preventing the blades from turning. Garbage disposals come with a tool that can be used to turn the flywheel, but, if it cannot be found, the handle of a wooden spoon will usually be able to do the job. Most units have a reset switch. Pressing it may be all that is needed to get it running.

If you have any questions about garbage disposal maintenance, Lake Country Home Services is happy to help. If the problem is too difficult to solve on your own, we offer dependable Milwaukee appliance repair.

What To Look for in a Milwaukee Appliance Repair Company

Milwaukee Appliance RepairIt’s inevitable…all things go to waste or need repair at one point or another. So what should we do to maintain our machines and if necessary find the right Milwaukee appliance repair company to repair our dishwasher, front load washing machine, DCS outdoor grill, etc.?

When you have done all that you can to maintain your own machines and don’t know what else to do, where are you going to turn? A Milwaukee appliance repair company may be a good choice, but who should you choose? There are some really important qualities to look for when you want to get the job done right.

Factory Authorized Service Center

There are some appliance repair companies that have gone through a gruesome process of becoming factory authorized service centers for specific brands.This means that when a company is a factory authorized service center for less common brands like Fisher & Paykel, they have gone through specific specialized training to be able to fix the parts that are different. You will get the fix that you need to, done efficiently and correctly the first time.

Trustworthy

There are some Milwaukee appliance repair companies who have been deemed not trustworthy on different review sites like Yelp or even Google reviews. It’s important to be well-known and have a positive reputation in their local service area. A company must be trusted by its community. For example, check out these reviews on Google for our business. Reviews are one of the best ways to show trustworthiness in the community, because people generally look companies up online before calling or inquiring for services.

Quality & Efficient Service

When you are looking for an appliance repair company, it is important to know what kind of service they provide. When you find different companies, look them up and see what people in the community have to say about their service, if it is quality, efficient, and if they are a reputable company. People will tell you about their services, whether it’s quality and efficient or slow and expensive, use names of specific repairmen that came to their homes, and give you a good feel for who they are as a company.
Take a look at who they are online, where they are involved both on and offline. You can find Lake Country Home Services all over the net! Facebook, Twitter,Google, Yelp, etc. Come interact with us and let us know what you think! We are the Milwaukee appliance repair company that wants to help you with the service you deserve.

How to Clean High Efficiency Washing Machines

High Efficiency Washing MachineHigh efficiency washing machines uses less water, energy and detergent than conventional washing machines. Therefore, many people are replacing their old washing machine models with high efficiency models.

If you have purchased a high efficiency washing machine, it’s extremely important to regularly clean the machine and to use the proper amount of detergent to deter minerals, detergent and softener from building up in the machine. Any buildup of residue in the machine can create an environment where mold and mildew can grow; this can cause an odor.

Cleaning a washing machine is not as difficult as you would think! Here are four tips that will help you to keep your machine clean and odor free:

The Drum

It is very important to clean out the inside drum of your high efficiency washing machines as well as the door of the machine. To do this, you’d want to buy some washing machine cleaner for your specific brand. Use this cleaner to wipe the drum and the inside of the door thoroughly. From there you want to let it sit for about 5 minutes and then wipe off as not to leave any residue behind to get into your clothes.

The Rubber Seal

Clean the rubber seal around the door of the washing machine. To do this properly, you will need to clean the outside of the seal and then pull the seal back from the washer. This will allow you to clean under the seal. You can use vinegar or bleach to clean the grime in and around the seal.

The Detergent Tray

Make sure that your detergent tray is clean. To properly clean the tray, just soak the pieces in a sink full of hot, soapy water. You can add of bleach if necessary to remove any mold.  This is a fairly simple process and shouldn’t consume a lot of your time.

The Detergent Compartment

Clean the detergent compartment in the washing machine. To do this properly, you will need to use a spray bottle filled with vinegar. Wipe down thoroughly after spraying with the solution.

To complete the process, run the machine on the clean cycle. You can use hot water or a product designed specifically to clean high efficiency washing machines. You must also look at your dishwashing machine in a similar light.

If you are still having problems with your machines or if you have problems with the cleaning process, call Lake Country Home Services for your Milwaukee appliance repair assistance.

Why Is Going to a Factory Authorized Service Center Important?

Factory Authorized Service Center RepairmanWith the seemingly infinite amount of information on the internet, it’s easy to believe there’s a shortcut to handling appliance repairs. Pinterest is full of DIY (Do It Yourself) projects. There are websites devoted to tidbits of information known as “life hacks.” Want a life hack for repairing a broken headphone plug for $2.00? It’s out there. Having a YouTube video guide you through doing your own repairs is all the rage. However, my own experience with instructions (from a reputable internet site I might add) left me with a completely broken iPad instead of a slightly broken iPad. And let’s face it, we invest in quality appliances from brands like LG, Frigidaire, Fisher & Paykel and Whirlpool for a reason.
When my Fisher & Paykel dryer starts making a little too much noise, I don’t want to google it. I don’t want to find a random repair service somewhere in Milwaukee from the Yellow Pages. I want the best possible repair service available. Contacting a Factory Authorized Service Center guarantees I’m getting that and here’s why.

Trust

Service Centers are authorized by a manufacturer after an extensive process which isn’t limited to training. Criminal background checks for employees, evaluation of the service center’s scheduled and after hours availability, being an established business with a positive service history, compliance with local, state and federal code and ordinances, maintaining proper licenses and insurance are some of the additional requirements. If a Service Center has been that thoroughly vetted by manufacturers, they have my trust.

Expertise

Service Centers get the Authorized stamp of approval after proving their expertise. Technicians receive specialized training that includes studying products, using test equipment for hand’s on experience and learning to accurately estimate the cost of repair. Technicians not only maintain their knowledge but stay current with the latest products and continued training. Additionally, being a Factory Authorized Service Center means more customers. More customers means more experience.

Parts

Manufacturers use data that’s only available to them to develop a list of most replaced parts around the world. Factory Authorized Service Centers carry these most used parts in their inventory. In many cases, these technicians won’t need to order a part and get back to you. Sure, you can hand wash your dishes for a couple days until a part comes in but do you want to? Don’t you have better things to do with your time?

Warranty

Tinkering with a product by a non-authorized technician can void your warranty. Yet a Factory Authorized Service Center technician will be able to understand warranty details and act on behalf of the manufacturer for covered repairs.

Recalls

Because they stay current with manufacturer information, authorized technicians will be aware of recalls and can provide a repair you didn’t even know you needed. I experienced this once, and that level of care made a lasting impression.

What’s Next?

The next time your fridge is on the fritz, remember that the manufacturer put their name on that refrigerator. That same manufacturer authorized only top notch repair companies, after an extensive certification process, to become a trusted Factory Authorized Service Center. Want a life hack for repairing your bright red, Ultra-Large Capacity with Steam Technology LG washing machine? Call Lake Country Home Services at 262-367-7150